DJI Ronin-MX 3-Axis Gimbal Stabilizer - Black


GBP 1177.99


DJI Ronin-MX  is dual-use gimbal suitable both for mounting on the Matrice 600 aerial platform as well as deployment closer to the ground. Improving over the Ronin-M, it features magnesium construction to yield high rigidity while keeping the weight down. The gimbal is suitable for cinema cameras, mirrorless cameras, and DSLRs weighing up to 10 pounds. Out of the box it supports two-operator operation, and includes a radio controller (transmitter) for the camera operator. There is also an optional Thumb Controller (available separately) for solo operation. When installed on the Matrice 600 aircraft, the gimbal can be controlled via the DJI GO app. An included universal mounting adapter allows it to be adapted for use with jibs, car mounts, and various other types of camera support equipment. There is also a handlebar for handheld use.

+ Wish List

Showcased Accessories


    Load Weight (Reference Value)

    4.5 kg

    Angular Vibration Range


    Maximum Controlled Rotation Speed

    Pan Axis: 200°/s
    Tilt Axis: 100°/s
    Roll Axis: 30°/s

    Mechanical Endpoint Range

    Pan Axis Control: 360°
    Tilt Axis Control: +270° to -150°
    Roll Axis Control: ± 110°

    Controlled Rotation Range

    Pan Axis Control: 360°
    Tilt Axis Control: +45° to -135°
    Roll Axis Control: ± 25°

    Electrical and Mechanical


    Temperature sensor


    32-Bit DSP Processor


    D-Bus receiver supported

    Working Current

    Static Current: 300 mA (at 16 V)
    Dynamic Current: 600 mA (at 16 V)
    Locked Motor Current: Up to 10 A (at 16 V)






    2.4 GHz



    Bluetooth 4.0


    1 x USB 2.0


    Power Requirements

    4S Ronin-M battery

    System Requirements

    Assistant Software

    Windows XP or above
    Mac OS X 10.9 or above
    iOS 7.1 or above
    Android 4.3 or above


    Control Modes

    Underslung Mode
    Upright Mode
    Briefcase Mode
    Aerial Mode
    Jib or Wirecam Mode

    Accessory Power Ports

    2 x 12 V Regulated P-Tap
    1 x USB 500 mW
    1 x DJI Lightbridge

    Camera Tray Dimensions

    Maximum depth from the center of gravity on camera base plate: 4.7" / 120 mm
    Maximum height measured from top of camera base plate: 7.7" / 195 mm
    Maximum width: 6.3" / 160 mm

    Operating Temperature

    -15 to 50°C


    Including Handle Bar: 2.77 kg
    Including Vibration Damper: 2.15 kg

    Dimensions (W x D x H)

    Excluding Handle Bar: 280 x 370 x 340 mm
    Including Handle Bar: 560 x 370 x 440 mm

    • DJI Ronin-MX 3-Axis Gimbal Stabilizer
    • Handle Bar
    • 2.4 GHz Remote Control
    • Tuning Stand
    • 2 x Intelligent Battery
    • Charger
    • Cable Pack
    • Micro-USB Cable
    • Camera Mounting Plate
    • Upper Mounting Plate
    • Vibration Absorber
    • 2 x Camera Screw A (1/4″-20)
    • 2 x Camera Screw B (3/8″)
    • 2 x Camera Screw C (1/4″-20)
    • 2 x Camera Screw D (3/8″)
    • Lens Support
    • 4 x Allen Wrench



    Forgot Password?

    By continuing you agree to our T & C and the Technese Privacy Policy.

    Create An Account

    First Name:

    Last Name:


    User Name:

    Email Address:


    Show Password

    Confirm Password:


    Phone Number:

    + -