DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer - Black


GBP 765.99


The Ronin-M 3-Axis Handheld Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 8 pounds, the Ronin-M uses brushless motors that work on three axes: one for side-to-side “roll” – keeping the horizon level – one for tilt, and one for pan. The system is computer-controlled and features a tilt range of 105° up / 165° down plus a roll range of ±110°. Furthermore, the system boasts a precision of control of ±0.02°, enabling precise camera moves and stability correction against even very fine movements. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.
The Ronin-M supports dual-operator shooting, much like working with a jib that has a motorized pan/tilt head. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin-M itself moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin-M to install your own receiver.
As with sled and vest style stabilizers, motorized gimbal systems require balancing before use. Once balanced, you can configure the Ronin-M for your particular camera arrangement using the Assistant Software for compatible iOS and Windows (Desktop) devices with Bluetooth. Because every camera and lens combination has a different mass and weight distribution, there is an ATS (Auto Tune Stability) procedure in which each axis will adjust individually, repeating the process until all three are aligned. A gimbal tuning stand is provided so you won’t have to hand-hold the rig during this process.
The included 4S lithium-ion polymer battery powers the Ronin-M for up to six hours. It is a “smart” battery, meaning power regulation and protection circuitry is built-in and there is no separate balancing lead, unlike many lithium-polymer batteries. A charger is also included, and it is important to always use chargers designed for the Ronin-M battery because of the smart circuitry. Two 12V DC PowerTaps and one USB power port on the camera base allow you to power on-camera accessories directly from the Ronin-M battery to simplify your charging regime and avoid unnecessary added weight.

+ Wish List

Showcased Accessories


    Load Weight (Reference Value)

    8 lb / 3.6 kg

    Angular Vibration Range


    Maximum Controlled Rotation Speed

    Pan Axis: 90°/s
    Tilt Axis: 100°/s
    Roll Axis: 30°/s

    Mechanical Endpoint Range

    Pan Axis Control: 360°/s
    Tilt Axis Control: +105° /-165°/s
    Roll Axis Control: ± 110°/s

    Controlled Rotation Range

    Pan Axis Control: 360°/s
    Tilt Axis Control: +105° /-165°/s
    Roll Axis Control: ± 25°/s

    Electrical and Mechanical

    Motor Type

    3 x Brushless

    Working Current

    Static Current: 300 mA (at 16 VDC)
    Dynamic Current: 600 mA (at 16 VDC)
    Locked Motor Current: 10 A maximum (at 16 VDC)


    Independent IMU module
    Temperature sensor


    32-bit DSP processor





    D-Bus receiver supported



    2.4 GHz for transmitter (remote controller)
    Bluetooth 4.0


    2 x 12 VDC regulated PowerTap
    1 x USB power output (500 mW)
    1 x DJI Lightbridge interface

    System Requirements

    Assistant Software

    Desktop: Windows (32- or 64-bit): 8, 7, XP SP3
    Mac OS X: 10.9 or above
    iOS 7.0 or later


    Control Modes

    Underslung Mode
    Upright Mode
    Briefcase Mode

    Supported Camera Dimensions

    Maximum depth at center of mass on camera base plate: 4.7" / 120 mm
    Maximum height measured from top of camera base plate: 7.7" / 195 mm
    Maximum width: 6.3" / 160 mm

    Power Requirements

    4S Ronin-M Battery

    Operating Temperature

    -5 to 122°F / -15 to 50°C


    5.07 lb / 2.3 kg (fully loaded with handlebar)

    Dimensions (W x D x H)

    19.7 x 8.3 x 16.5" / 500 x 210 x 420 mm

    • DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
    • Ronin-M Transmitter (Controller)
    • 2 x Intelligent Battery for Ronin-M (1580mAh)
    • Battery Charger
    • Handle Bar
    • Tuning Stand
    • Cable Pack
    • Micro-USB Cable
    • Camera Mounting Plate
    • 2 x Camera Screw A (1/4″-20)
    • 2 x Camera Screw B (3/8″-16)
    • 2 x Camera Screw C (1/4″-20)
    • 2 x Camera Screw D (3/8″-16)
    • Lens Support Screw
    • Lens Support
    • 2 x Allen Wrenches



    Forgot Password?

    By continuing you agree to our T & C and the Technese Privacy Policy.

    Create An Account

    First Name:

    Last Name:


    User Name:

    Email Address:


    Show Password

    Confirm Password:


    Phone Number:

    + -