DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal - White

Out of Stock

GBP 1614.99

OVERVIEW

Capture 4K video and take 12-megapixel still photos from the air with the DJI Inspire 1 v2.0 Quadcopter with Integrated Camera and 3-Axis Gimbal. Forgoing the fixed landing gear design found on many earlier quadcopters, the Inspire 1 features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards (16GB included) and can also beam a live 720p feed to a mobile device running the DJI Lightbridge app or a monitor or FPV glasses with an HDMI input. One transmitter (radio controller) is included and a second can be added so that one operator can pilot and another can pan and tilt the camera.

+ Wish List

Showcased Accessories

    Performance

    Hovering Accuracy (GPS Mode)

    Vertical: 1.6' / 0.5 m
    Horizontal: 8.2' / 2.5 m

    Maximum Angular Velocity

    Pitch: 300°/s
    Yaw: 150°/s

    Maximum Tilt Angle

    35°/s

    Maximum Ascent/Descent Speed

    Ascent: 16.4 fps / 5 m/s
    Descent: 13.1 fps / 4 m/s

    Maximum Speed

    72.2 fps / 22 m/s (Attitude mode; no wind)

    Maximum Flight Altitude

    14,764' / 4,500 m

    Maximum Wind Speed Resistance

    32.8 fps / 10 m/s

    Maximum Flight Time

    With Zenmuse X3: Up to 18 minutes
    With Zenmuse X5/X5R: Up to 15 minutes

    Camera

    Model

    Name: X3
    Designation: FC350

    Sensor

    Sony EXMOR 1/2.3" CMOS

    Resolution

    12.0 MP

    Lens

    Field of View: 94°
    Focal Length (35 mm Equivalent): 20 mm
    Aperture: f/2.8
    Design: 9 elements in 9 groups; aspherical lens element
    Filters: Anti-distortion filter; UV filter

    Video Recording

    UHD (4K):
    4096 x 2160: 24p, 25p
    3840 x 2160: 24p, 25p, 30p

    FHD (1080p):
    1920 x 1080: 24p, 25p, 30p, 48p, 50p, 60p

    HD (720p):
    1280 x 720: 24p, 25p, 30p, 48p, 50p, 60p

    Maximum Bitrate: 60 Mbp/s

    File Format

    Photo: JPEG, DNG
    Video: MP4 in a .MOV wrapper (MPEG-4 AVC/H.264)

    Recording Media

    Type: microSD/SDHC/SDXC up to 64 GB
    Speed: Class 10 or faster
    Format: FAT32/exFAT

    Photography Modes

    Single shot
    Burst: 3, 5, 7 frames per second (AEB: 3/5 frames per second; 0.7 EV bias)
    Time-lapse

    Operating Temperature

    32 to 104°F / 0 to 40°C

    Gimbal

    Model

    Zenmuse X3

    Number of Axes

    3-axis

    Control Accuracy

    ±0.03°

    Maximum Controlled Rotation Speed

    Pitch: 120°/s
    Pan: 180°/s

    Controlled Rotation Range

    Pitch: -90° to +30°
    Pan: ±330°

    Angular Vibration Range

    ±0.03°

    Output Power

    Static: 9 W
    In Motion: 11 W

    Operational Current

    Static: 750 mA
    In Motion: 900 mA

    Mounting

    Detachable

    Flight Controller

    Indoor Hovering

    Enabled by default

    Optical Sensor (Optical Flow)

    Frequency: 50 Hz
    Velocity Range: Below 26.2 fps / 8 m/s (6.6' / 2 m above the ground)
    Altitude Range: 2 to 196.8" / 5 to 500 cm

    Operating Environment: Rich pattern surface with adequate lighting (> 15 lux)
    Operating Range: 0 to 8.2' / 0 to 2.5 m

    Motor

    Model

    DJI 3510H

    Motor Velocity Constant

    420 Kv

    Maximum Thrust

    4.8 lb / 2200 g at 25 V and sea level

    Weight

    107 g

    Transmitter

    Operating Frequency

    Transmitter to Transmitter: 5.728 to 5.850 GHz
    Transmitter to Aircraft: 2.400 to 2.483 GHz

    Range

    Line-of-Sight: Up to 6561.7' / 2000 m

    Receive Sensitivity

    1% PER:-93 dBm

    EIRP

    10 dBm at 900 MHz; 8 dBm at 5.8 GHz; 20 dBm at 2.4 GHz

    Connectivity

    1 x USB type A female (for connecting mobile device)
    1 x Micro-USB for firmware updates
    1 x Mini-HDMI video output for FPV
    1 x CAN-Bus port (for future accessory)

    Dual User Capability

    Host-and-slave connection

    Mobile Device Holder

    Tablet or smartphone

    Output Power

    9 W

    Power Requirements

    1.2 A at 7.4 VDC

    Battery

    6S LiPo; 6000 mAh

    Charging Temperature

    Less than 3 Months: -4 to 113°F / -20 to 45°C
    More than Three Months: 72 to 82°F / 22 to 28°C

    Storage Temperature

    Less than 3 Months: -4 to 113°F / -20 to 45°C
    More than 3 Months: 72 to 82°F / 22 to 28°C

    Mobile Device Holder

    Device Width: 2 to 6.7" / 5 to 17 cm

    Flight Battery

    Voltage

    6S LiPo; 22.2 VDC

    Capacity

    4500 mAh / 99.9 Wh

    Maximum Charging Power

    180 W

    Mobile App

    System Requirements

    iOS: 7.1 or later
    Android: 4.1.2 or later

    Note: The device must be connected to a transmitter via USB (wireless linking is not supporting). Additionally, waypoint navigation requires an active Internet connection in order to load the maps

    • DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal
    • Transmitter for Inspire 1 Quadcopter (White)
    • Zenmuse X3 Gimbal and Camera Unit (Inspire 1 Variant)
    • Mobile Device Holder
    • TB47 Intelligent Flight Battery for Inspire 1 (99.9Wh, White)
    • ND Filter
    • Flight Battery Charger
    • Charging Cable for Transmitter
    • Power Cord
    • 4 x Spare Prop CW/CCW Pairs
    • 16GB microSD Memory
    • Suitcase for Inspire 1 Quadcopter

    Username:

    Password:

    Forgot Password?

    By continuing you agree to our T & C and the Technese Privacy Policy.

    Create An Account

    First Name:

    Last Name:

    Gender:

    User Name:

    Email Address:

    Password:

    Show Password

    Confirm Password:

    Country:

    Phone Number:

    + -